CON CORNICE O SENZA CORNICE? NEW INSTALLATION SOLUTIONS FOR DOUBLE
GLASS PHOTOVOLTAIC MODULES
The debate about whether a double-glass module has a frame or no frame is a headache for all manufacturers of double-glass modules. Diversi istituti di design, EPC, investitori, e i proprietari hanno idee ed esigenze diverse.
Al giorno d'oggi, a new type of double-glass module mounting frame almost perfectly solves all the concerns from the solar panel factory to the owner.
As can be seen from the figure above, the frame is only installed on both sides of the double-glass module, which is suitable for various roof photovoltaic systems, including ground-mounted photovoltaic power plants, and ground photovoltaic power stations. Not only is it very easy to install, it also does not affect the thermal performance of the solar panels.
It is especially effective for American industrial and commercial / domestic roofs that use double-glazed / double-sided modules as single-sided modules, because the design is particularly beneficial to the heat dissipation and ventilation of the roof / colored steel tile / sloping roof photovoltaic modules.
In addition, the design has the following characteristics:
1. Installazione facile, whether it is installed on a bracket or color steel tile or other roof surface;
2.Light weight, will not affect the bearing capacity of color steel tile roof and support too much;
3.Maintain the effect of easy cleaning of the component surface, no dust accumulation, self-cleaning effect in natural state;
The frame can also be designed in the form of modules that can be embedded on both sides, that is, the same frame is used as a frame shared by two double-glass modules, ed è installato su mensola o tetto per ottenere una disposizione continua dei moduli fotovoltaici.
Secondo la verifica dello sviluppatore, questo nuovo design risolve il problema della rapida installazione e della rottura del modulo a doppio vetro. L'impianto fotovoltaico a doppio vetro installato ha una temperatura di esercizio 4-6 °C inferiore rispetto ad altre soluzioni, che aumenta notevolmente la produzione di energia.
Per impianti fotovoltaici su tetto, anche i moduli monovetro possono utilizzare questo telaio, senza la necessità del telaio in alluminio del modulo in fabbrica. Tuttavia, i fornitori di componenti devono utilizzare questo framework per verificare i test delle prestazioni relativi a IEC.
